TVR masonry saws
TVR masonry saws
- Single-phase and three-phase models.
- With a cutting blade from 300 to 450 mm.
- 2 positions to set the head depending on the disc diameter (300 or 350 mm).
- It has a miter system for your comfort and ergonomics.
Available models: TVR 3M, TVR 4, TVR 450-3M, TVR 450-4
The blade may be vertically set, which makes it possible to cut thicknesses between 10 and 15 cm in two passes, one on each side of the piece. The mitering operation can be performed at any angle between 0 and 45º and the piece could equally rest at either side of the carriage, as this carriage has only one cutting slot. It can be supplied with foldable wheels and legs.
